 |
|
| |
|
|
| |
|
|
| |
Board mountable PCB drives Quadrupoles
( 01 May 2008 )
|
• The ML1350 modular PCB is specifically configured to drive quadrupoles used in mass spectrometers and electrostatic lens applications.
• Provides two sets of bipolar output: ±1350V DC and ±245V DC, each capable of 15mA of load current with a ripple specification of 0.1% peak to peak.
• The compact, low cost, surface mount, high performance module is ideal for use in advanced systems.
• The ML1350 offers voltage regulated, current limited outputs that are fully protected against arc and short circuit conditions. An enable function allows for easy remote control operation. Input voltage is specified at +24V DC, ±1.2V DC at 3A. A protective under-voltage shut down feature will disable the outputs when an under-voltage input condition is detected.
• Mechanical dimensions are 0.98x4.33x3.15 inches (25x110x80mm). The device is CE and UL approved.
|
|
|
|
|
|
