ON Semi Releases PureEdge T Single and Dual Frequency Crystal Oscillator Modules

ON Semiconductor has introduced nine PureEdge PLL based clock modules for crystal oscillator (XO) replacement. The NBXxxxx series of devices are for high-speed networking, telecom, and high end computing applications. The NBXSBA010, NBXDBA012, NBXDBA014, NBXDBA015, NBXDDA016, NBXDBA017, NBXDBA018, NBXSBA020 and NBXSBA021 crystal oscillator modules use a high Q fundamental mode crystal and analog Phase Lock Loop (PLL) multiplier to provide single or dual frequency, ultra low jitter and phase noise LVPECL/CML differential output. The NBXSxxx (single frequency) / NBXDxxx (dual frequency) family of crystal oscillators include the industry’s best long-term time domain jitter performance and exceptional device noise floor of -163 dBc / Hz at 10 megahertz (MHz) offset with Phase RMS jitter of 0.4 picoseconds (ps) when integrated 12 hertz (Hz) to 20 MHz allowing bigger clock timing margins for whole system clock tree. They create sub picosecond (ps) jitter quality clocks delivering single and/or dual frequency of 100 MHz, 106.25 MHz, 125 MHz, 155.52 MHz, 156.25 MHz, 200.00 MHz, 212.5 MHz, 250 MHz, 311.04 MHz and 312.5 MHz that are ideal for 1x/2x FibreChannel, SATA, iSCSI, PCIe, SONET / SDH, Ethernet and clock margining applications. These devices are available in a 5.0 mm x 7.0 mm SMD (CLCC-6) package. The NBXSxxx (single frequency) and NBXDxxx (dual frequency) are budgetary priced at US$5.99 for the +/-50 PPM (frequency accuracy) and US$7.50 for +/-20PPM (frequency accuracy) per unit for 1,000 unit quantities.