Molex Introduces Dual Port 26-Circuit Stacked Connector

Molex has added its iPass product family. For systems with boards fixed to one side of the chassis, the stacked dual port connector makes it possible to double the I/O bandwidth without a mechanical redesign of the system enclosures. Each port on the dual port connector includes eight differential pairs, creating four lanes, each capable of 12 Gbps. Total bandwidth enabled through the dual port assembly is 96 Gbps. Moreover, the stacked connector integrates two individual SAS 4x ports into a single assembly. Additional features and benefits include: Double port density, so there is no “beachfront” increase compared to the current single port product; An integrated press-fit connector assembly with cage that provides one-step placement to PCB; Robust guide pins located on each side of the cage that ensures assembly alignment to PCB; Four integral screw-mount hold downs applied from the bottom of the PCB to provide optimal retention of die-cast assembly to the PCB without taking up additional board real estate; A front elastomeric EMI gasket that provides excellent EMI protection to the system face plate; and Four ground-pad alleys located at the rear of the die cast assembly to provide ease of routing on top layer of PCB.