New Adhesive Produces Crystal Clear Bond Line

Clear Welder a two-part structural methacrylate adhesive from ITW Devcon, is specially formulated to produce a crystal-clear bond line on a variety of plastics including acrylics, PMMA, FRP, ABS, PVC, and PETG. With mixed viscosity of 22,000 cps, the Clear Welder two-part adhesive is formulated to produce clear bond line on various plastics including acrylics, PMMA, FRP, ABS, PVC, and PETG. It requires little or no surface preparation, has typical hardness of 82 Shore D, and withstands service temperatures from -67 to 200°F. Available in 380 mL co-axial cartridges, unit is mixed as dispensed in 10:1 ratio with manual/pneumatic dispensing gun and attains functional cure in 2 hr at room temperature.